Croydon - CR0 - London
Heat in London decommissioned and removed the old cold water tank and cylinder removing all redundant pipe work from the airing cupboard to supply a New 10KW Electric Boiler and 150ltr unvented cylinder within an airing cupboard at this property in Croydon. Including a 5byear manufacture warranty along with our 2 year guarantee on all new pipework and fittings carried out by ourselves.
Fitting the unvented cylinder gives equal main pressure on all hot and cold outlets so no shower ump is required. The cylinder was fed from the existing mains within the airing cupboard at the property.
The heating and hot water is controlled via a twin channel programmer and room thermostat.
Bromley London- BR2
Heat in London carried out a full power flush of the heating system using out Kamco CF900 power flush pump at this property in Bromley, London.
We used Kamco CombiMag Digital Magnetic filters, which allow use to heat the system water without the use of the boiler for a more thorough clean giving better end results. The radiators were individually flushed until clean.
After the clean the heating system was refilled, vented and tested. We also ensured that the correct levels of inhibitor was added back to the system to help prevent oxide from building up in the future.
Pimlico - London

Heat in London carried out a Powerflush using our Kamco powerflush machine on an underfloor heating system that was not giving out the same heat output as it previously had.

Addiscombe - London

Heat in London carried out a cylinder replacement in Addiscombe. Customer immersion heater was broken and due to the age of the cylinder it was not possible to replace. We were able to upgrade the cylinder and lagged all accessible pipe work to bring the system up to regulation.

Chipstead Station Parade - Chipstead

During this visit in Chipstead Heat in London carried out a tightness test, fitted a 1/2″ iron to the hob inlet. Heat in London then connected the hob to the gas supply, carried out the tightness test that passed, commissioned  the hob and completed a safety certificate for the works carried out.

Carshalton
At this property in Carshalton the job in hand was to decommission and remove the old boiler to be replaced by a new boiler choosen and supplied by our customer. The install of the boiler and the flue was completed in the same location.
To complete this we needed to reroute flow, return, hot and cold through the cupboards to the new boiler. We installed primary filter, mini shock arrestor and inline scale reducer along with the upgraded gas supply to 22mm. The boiler was commissioned on completion.
At this property we alco carried out a power flush using our Kamco machine
Thornton Heath

Power Flush carried out in Thornton Heath. You will see the black on the machine, this is normally chrome however the dirt/grime taken out is evident on our machine. Do you need a power flush?

Chislehurst - BR7 - England

Heat in London decommissioned and removed cold water storage tank, vented cylinder and redundant pipework to supply and fit 250ltr Solar unvented hot water cylinder in the same location as the current cylinder.
We used both coils for the boiler feeds for the best performance. When solar power is fitted this needs to be  reconfigured so that 1 of the coils will be heated via the solar heat. We reconfigured the pipes in the airing cupboard to suit this new cylinder.
Along with the above works Heat in London also carried out the following works…

Removed existing shower pump and reconfigure pipework to suit.

Supplied and fit 15mm pressure reducing valve to the incoming mains supply under the kitchen sink. To  prevent unbalanced cold supply’s on mixer taps entering the hot supply and causing back flow.

Using a 18litre expansion vessel, we converted the heating system to a pressurized system.

Heating system was treated with the correct levels of system inhibitor once work had been completed.

Beddington Lane Croydon

At this job in Beddington Lane we replaced the showers and urinals.

Within this job we had to remove the panelling to gain access to the pipework for the different aspects of this job and to isolate the hot and cold water feeds. The old showers and TMV valves were decomissioned.

 

New holes were needed to run pipes through for the new showers and urinals along with connecting new hot and cold feeds to the shower location. All delabie mechanical shower panels and urinals were tested for correct operation before panels replaced.

 

 

CR7 8JE, Croydon - London
Heat in London supplied and fitted a Vaillant EcoFit Pure 825|(25kw) combination boiler with 10 years warranty included (providing boiler serviced yearly) We also provided 3 years free servicing.
The boiler was fitted in the same location as the original boiler using the same flue hole, the above boiler was recommended by Heat in London after we tested the pressure and flow rate of the incoming mains.

The additional service provided….
Supply and Fit Vaillant magnetic filter the the heating return pipe as per manufacturer’s instructions.
Supply and Fit mains shock arrestor to incoming mains as per manufacturer’s instructions.
Supply and Fit limescale reducer on the mains fed to the boiler.
Heating system to be flushed using chemicals and a magnetic filter.
Wallington, SM6
Heat in London relocated the radiators in this property in Wallington and installed a new air source heat pump.
To complete the above we run a new Heating system carcass from the bedroom cupboard to all the new radiator locations. With  28mm ran from the bedroom, down the landing changing to 15mm pipe as we branched off the radiators.
Ground floor radiators were supplied from drops coming from the front small bedroom and the rear bedroom. These pipes were surface mounted as discussed with customer.
SW20 9LX, LONDON
Heat in London carried out the following works for this client which included the installation of the new shower along with decommissioning of the previous spa shower cubicle along with the waste removal.
A new low profile quadrant shower base was installed in the same location as the previous one with the reconfiguration of the hot and cold pipes to suit the new shower. This job included all pipes fitting and sealants within the price.
Once all work was completed we arranged for a second contractor to come in to make good the wall and tiles of the shower area due to the size and natural effects of removing and installing new.
Mitcham - London
The work carried out in this property in Mitcham by Heat in London was to remove and decommission the old existing cold water storage tank from the airing cupboard and then supply and fit a new 160ltr direct unvented hot water cylinder being fed up the current existing incoming mains.
The hot and cold both have mains pressure and the cylinder was fitted with limescale reducer and fully registered with the manufactures and local authority
Beckenham - London
Heat in London carried out this job in Beckenham London which involved installing underfloor heating and a new Worcester boiler.
Heat in London supplied and fitted the underfloor heating system throughout the kitchen, dining room and down stairs toilet. The toilet section was fitted using metal spreader plates that sit on top of the joist ready for the builders to install insulation boards between the joist to give the best possible performance of the underfloor heating. The remaining sections we fitted the installation boards and clipped all in to place ready for the floor to be screed. To control the underfloor heating we installed a Neo Air Thermostat.
The boiler installed was a Worcester 8000 Life 50kw combination boiler with 5 years warranty includedif yearly serviced. This boiler was recommended after we carried out test of the preassure and flow rate of the incoming mains, we also fitted Worcester magnetic filters to the heating return pipe as per the manufactures instructions along with mains shock arrestor to the incoming mains and fully registered the boiler with Worcester as gas safe.
To control the heating of the property a Hive wireless thermostat was installed and the heating system was flushed with chemicals.
London

Heat in London completed this bathroom refurbishment for our customer which included the following works to take it to a high finish.

To complete the job we drained the heating and domestic system, hot and cold supplies were brought to the necessary area from the capped pipes.

We fitted a thermostatic shower bar and riser rail, hand wash basin, concealed toilet frame with back to wall pan. Furthermore on this job we installed the new heated towel rail in the bathroom with a new radiator in the room adjacent to the shower room.

Customer also requested for an outside tap to be installed at the front of the property which was also completed by Heat in London

Beddington Lane - Mitcham
Supply and install new Twyford janitorial sink to match existing sink in cleaners cupboard in main building along with the installation taps and waste.
Tee into existing waste and run new waste pipe to sink location
Supply and install new Ariston 10 litre water heater.
Isolate and tee into existing mains water feed to washing machine and run new 15 mm copper pipe to new sink and water heater location.
Tee of to supply cold tap and continue up to cold inlet on water heater along with running new hot feed down to supply hot tap.
Install safety discharge pipe with Tundish teeing into waste, expansion vessel, pressure reducing and non return valve.
The new power supply will run from socket behind washing machine to water heater by the electrician.
CROYDON - CR0 - LONDON
At this property Heat in London fitted a brand new Vaillant ecoFit pure 30kw combination boiler with 10 years warranty. We fitted rear flue so that the boiler would sit high as discussed with our customer along with a wireless Honeywell programable thermostat. The installation was carried out to the full manufacture’s guidelines of the boiler along with our own guarantees.
The team condensed pipe to run internally to the sink waste pipe after the kitchen was removed A new heating carcass was agreed to be ran round the perimeter of the kitchen to feed the hall, lounge and dining room new radiators which is scheduled to be supplied and fitted by Heat in London.
Boiler fully commissioned and registered with Gas Safe and Vaillant Warranty.
Three years boiler service included.
This job is ready for the electrician stage, who will make a permanent electrical connection once the new kitchen is fitted.
South Croydon, England, CR2
Drain heating system and remove radiators that are no longer required.
Supply and fit ProWarm wet underfloor heating system to pre fitted thermal panels.
Underfloor heating to be sectioned of into 3 separate zones throughout the downstairs part of the property with all zones to be controlled via a ProTouch wifi Thermostat.
Underfloor heating manifold to be sited under the stairs as requested by our customer.
Boiler flow and returns to be reconfigured and fitted with 2 Honeywell zone valves so they can control the underfloor heating and radiator circuit independent of one another.
Erasmus street, SW1P 4HP
Supply and Fit Vaillant EcoFit Pure 830 |(30kw) combination boiler. 10 years warranty included when serviced yearly. Boiler to be fitted with a rear flue allowing us to raise the height of the boiler. Currently fitted scaffolding can be used to make good the flue hole.
Supply and Fit Honeywell wireless heating thermostat.
Supply and Fit condense neutralizer to avoid corrosion to the section of copper waste pipe.
Supply and Fit Vaillant magnetic filter the the heating return pipe as per manufacturer’s instructions.
Supply and Fit mains shock arrestor to incoming mains as per manufacturer’s instructions.
Supply and Fit limescale reducer on the mains fed to the boiler.
Heating system to be flushed using chemicals and a magnetic filter.
Replace all radiator valve with new Honeywell thermostatic valves and locksheild.
Boiler to be fully registered with Vaillant and Gas Safe.
Full flush of the heating system using a Kamco CF90 power flush pump.
Kamco magnets will be used to collect system debris whilst the flush is being carried out.
Radiators will be individually flushed until clean.
Heating system will be refilled, vented and tested.
The correct levels of system inhibitor will be added back to the system to prevent iron oxide from building up again.
Cut away existing gas outlet pipe.
Relocate the gas meter as far back to the corner as the regulator pipe will allow.
Reconfigure hot water supply pipe that runs from the kitchen cupboard and through the hall way. The dead leg will be removed by doing this and the new single pipe will run at the highest point allowing a smaller boxing to be made in the future.
South Croydon
At this property in South Croydon we completed a full power flush of the heating system using Kamco C90 machine and magnets, we also supplied and fitted a Megaflow Eco 170lr Unvented Cylinder with an additional valve to suit the current system.
The new cylinder was fully commissioned and registered with a 2 year service included.
Biggin Hill
Heat in London completed the removal of an old boiler and installed a brand new Vaillant ecofit pure 30kw combination boiler in Biggin Hill. We also supplied and fitted a new honeywell heating thermostat.
Along with the above we
Supply and Fit magnetic filter the the heating return pipe as per manufacturer’s instructions.
Supply and Fit mains shock arrestor to incoming mains as per manufacturer’s instructions.
Supply and Fit limescale reducer on the mains fed to the boiler.
After the work was completed the heating system was flushed using chemicals’ and a magnetic filter.
Wallington - SM6 - Surrey

Heat in London carried out a full boiler service at this property in Wallington. We drained the heating system, replaced the faulty zone valve. After the work was completed we refilled, vented and tested.

Croydon - CR0 - London
Heat in London installed a Ideal Vogue 32kw Combination Boiler with a 12 Year warranty included with a service every year. We used the same flue hole and fitted in the same location as previous boiler. The Ideal Vogue 32kw Combination Boiler was the best solution after testing the pressure and flow rate of the incoming mains.
Along with the boiler we fit ideal magnetic filter, mains shock arrestor as per manufactures instructions along with limescale reducer on the mains fed to the boiler.
The heating system was flushed using chemicals and magnetic filter. A full power flush of the heating system was completed using our Kamco CF90 power flush pump. We individually flushed the radiators  until clean and refilled, vented and tested the heating system.
London, Croydon, Sutton, Surrey

Heat in London carried out a full boiler service whilst also checking slow draining shower and water pressure.

 

We are available for all plumbing and heating needs from a leaking pipe to a complete bathroom refurbishment.

South Croydon - London - CR2
Called to a property in the South Croydon area to investigate a leak that is coming from one flat to another. The piping ran along the outside of the building and then went into the building. The leak was on the internal part of this.
To carry out the repair we needed to run a new external waste pipe bypassing the internal section. A new condense hole was drilled and the condense re routed and connected externally, followed by running the pipe following roof pitch to external waste pipe where it was re-connected.
South Croydon - London
Replaced Concealed toilet with a low level toilet supplied by customer as the customer could not get on with the concealed cistern as the push button was consistently breaking.
Whilst on the job we also supplied and fitted a new kitchen tap.
Eylewood Road - London - SE27
Installation of 3 brand new modern radiators at this property located in SE27. We installed two new radiators in the hallway running the new pipes under the floor and a new radiator in the kitchen area.
Worcester Park - Surrey
Yes a recycled boiler. A perfectly good boiler with nothing wrong has been recycled to our customer in Worcester Park. A great way to help someone out and reduce waste. Amazing idea.
We fitted the recycled Worcester combination boiler as a replacement of the current Vaillant boiler at the property and fitted new flue to reach the existing flue hole.
We then fitted the magnetic filter and the heating return pipe as per manufacture’s instructions. Fitted mains shock arrestor to the incoming mains also per manufacture’s instructions
Supply and Fit limescale reducer on the mains fed to the boiler.
Heating system to be flushed using chemicals and a magnetic filter.
Powerflush carried out.
Vestry Road - London
Our customer requested for current Vaillant boiler to be moved to the vacant bathroom cupboard. In order to complete the work we needed to locate the existing gas pipe that connects to the boiler to re-route to the new position.
We joined the heating flow, return, mains and hot water supply in the most direct way that was possible. Followed by running the condense pipe from the boiler to the closest waste pipe, to do this the pipe was chased into the wall.
Hive Thermostat was also installed.
We finished by refilling, vented and tested the heating system
Chipstead Station Parade - Chipstead
Boiler works-
Drain heating, mains and hot supply’s.
Cut out existing pipe work.
Reconfigure all pipe into copper and so that they all are flush back to the wall in preparation for new kitchen units.
Relocate TF1 compact magnetic filter so it sits above the work top height, making easily serviceable in the future.
Replace leaking pressure relief valve (internal of the boiler casing) and re-pressurize expansion vessel.
Kitchen works-
Run new heating pipes at plinth level to the dinning room and first fix for new radiator.
First fix for new radiator on the wall facing the boiler. Also we will run new hot and cold supply’s at plinth level to the new kitchen sink location. Leave isolated.
Gas Pipe.
Reconfigure gas pipe so its no above surface level within the new door way.
Extra-
System Power flush carried out.
Middlefields - Croydon
-Isolate hot and cold water supply to the kitchen tap.
Supply and fit new kitchen tap with one of similar design.
-Drain toiler cistern and remove faulty toilet inlet valve.
Supply and fit new bottom entry inlet valve and test once work is complete.
Shaftesbury Way - Twickenham

Heat in London was called upon to replace an old emersion which had unfortunately caught fire (nobody was injured)

We removed and replaced the old emersion with a brand new indirect cylinder at the property with a new emersion. With all the wiring carried out but one of our trusted qualified electrician that we work with.

Ephraim Road - London

At this property Heat in London assisted by fitting a 22mm Lever Valve. Existing incoming mains stopcock was ceased shut and the property did not have a on street isolation valve.

 

Heat in London froze the pipe using Artic Spray Disposable Pipe Freezing Kit and fitted a new 22mm lever valve for ease and quick isolation. Customer advised to contact the water board to fit them a on street isolation valve.

Clarendon Road - Wallington - SM6
For this job Heat in London decommission and remove gravity fed cylinder in the kitchen along with the removal and decommissioning of the cold water storage tank in the storage cupboard.
Supplied and fitted a Powerflow smart 100l multipoint unvented hot water cylinder at the rear of the cupboard. This resulted in all hot water outlets being under mains pressure.
We then reconfigured the old tank fed cold supply into mains to give all bathroom cold outlets mains pressure.
Followed by the fitting of a thermostatic shower.
As included with this job all rubbish and discarded materials was removed from site.
Venn Street - Clapham Common - London

Please contact us for more information on how we can help transform your bathroom into something new. We can assist in bathroom’s to wet rooms, new showers, vertical modern radiators and everything in between. We are an experienced team who can take care of all plumbing and heating needs and also work with other reputable tradesmen who can complete the job with stunning floors and great professional tiling.

This bathroom refurbishment was completed in Clapham giving a fresh new design with a stunning subtle finish with a beautiful lengthy sink finished with subtle yet eye catching tiling to match the WC.

 

[email protected]

Selsdon - London

Please contact us for more information on how we can help transform your bathroom into something new. We can assist in bathroom’s to wet rooms, new showers, vertical modern radiators and everything in between. We are an experienced team who can take care of all plumbing and heating needs and also work with other reputable tradesmen who can complete the job with stunning floors and great professional tiling.

This bathroom has the marble effect tiles throughout complemented by the black shower and towel rails finished with black tile trims, unit and mirror. A stunning modern bathroom.

 

[email protected]

Chislehurst

Heat in London transformed this small bathroom to a luxurious, modern calm space. Replacing the shower for a modern bath finished with a smart looking black towel radiator and finished with a white marble design on the walls to really highlight the space.

 

Carried out by one of our professional team Gino.

Brighton

The objective was to turn this small bathroom into a modern luxury wet room whilst optimising the space and creating an up to date modern feel to get ready for your day.

This job was completed with DB Carpentry and construction and GMB Electrical Installation

Sutton SM1
Heat in London supplied and fitted a Vaillant 830 Combination boiler with a 10 years manufacturer’s warranty included.
Boiler flue was terminated through the external wall and new gas supply was ran through the lounge, dinning room and the kitchen to the new boiler location.
We also supplied and fitted Vaillant Magnetic filter to the heating return return pipe along with the supply and fit of inline limescale reducer and mains shock arrestor to the mains feeding the boiler.
Hive Smart thermostat to be fitted with the New heating system to run throughout property to all radiator positions.
Boiler will be registered by ourselves with Gas Safe and Manufactures Warranty scheme.
3 years free service will be provided.
2 years guarantee on all pipework and fitting installed by us.
New Addington, Croydon

Heat in London are proud to of completed this Vaillant boiler install in the loft of a wonderful property situated in New Addington Croydon. Removing the old storage tank, boiler, redundant pipework and cylinder decommissioned.

We had to build a timber frame into the loft space for the boiler to be fitted on and fit loft boards to create a safe pass to the boiler.

The boiler itself was a Vaillant 830 combination boiler which comes with a 10 year manufactures guarantee included. Boiler flue terminated through roof and new gas supply was ran into the loft via the hall cupboard.

All the pipework lagged to prevent freezing and energy wastage in accordance with Building Regulation.

Wallington, Sutton

We replaced an Ideal Isar with a Vaillant EcoFit Pure 830 combination boiler that comes with 10 years warranty included. 3 years of servicing was also provided with the price.
We also installed a Hive Smart stat along with this boiler replacement. Our successful work allowed for the rest of the kitchen to contiune it’s refurbishment.

Powerflush - Purley, Croydon

Powerflush services were carried out using our Kamco cf90 pump and our brand new self-heating magnet filter. This allows us to clean the system and boiler with warm water even when the boiler is out of action.

Vaillant Boiler Fit - Clapham, London

We installed a Vaillant EcoFit Pure 625” system boiler fitted working with Joule unvented cylinder, 2 circuit underfloor heating system for the kitchen/dinner and Column radiators in this Clapham property.

Unvented Cylinder Fit - Clapham, London

We fitted this Joule cyclone Air Direct unvented cylinder in this property in Clapham, London.

Boiler System Conversion - Addington Village
  • Boiler System Conversion from a conventional boiler to a combination boiler.
  • Vaillant ecoFit Pure 830 boiler fitted.
  • Hive Active Heating Smart Thermostat fitted.
Boiler Replacement - East Croydon

Old Alpha 240e combination boiler ripped out and replaced with an Ideal Vogue C26 GEN2 combi boiler. This boiler service comes with a 12-year warranty.

Powerflush Services - Bromley

We carried out a Powerflush for this client out in Bromley, using the new Kamco CF90 pump. Powerflushing cures circulation and noise problems, which often occur with time, or as a result of design or installation faults.

Bathroom Services - Hove, Brighton

We provided bathroom services for a client in Hove, where we did bathroom resurfacing and bathroom fitting for two showrooms (bathroom and shower room).

Combination Boiler Replacement - Addiscombe, Croydon

We took out an old boiler and installed it with a new Ideal combination boiler replacement for this client in Addiscombe.

Boiler Fit & Powerflush - Bexleyheath, Kent

We installed a new Vaillant ecoFit Pure boiler fit, as well as a system power flush, which was carried out for this client in Bexleyheath.

Combi Boiler Fit - Selsdon, Croydon

Warm air unit remover and new Vaillant Ecofit pure combination boiler fitted.

Radiator Fit - Croydon

New vertical radiator fitted, hive smart thermostat installed and a full strip-down boiler service of a Worcester Greenstar

Boiler Replacement - Selsdon, Croydon

Ideal Vogue 32kw combination boiler fitted in the loft space. Additional filling loop and pressure Gauge fitted so customers don’t need to get in the loft if/when the heating system required more pressure.

Combination Boiler Installation - South Croydon

New Vaillant ecoFit Pure combination boiler relocated and fitted in the loft to give our customers much-needed space in the old airing cupboard. The boiler comes with 10 years parts and labour warranty and three years of boiler services provided by ourselves.

Boiler Fit - Crawley

This customer’s old open vent conventional system was ripped out and replaced with a new Vaillant system boiler which was fitted in the new extension working alongside a Gledhill 200litre unvented cylinder. The new system was fully tested, registered and commissioned.

Boiler Replacement - Edenbridge, Kent

New Ideal Vogue Combination boiler fitted in the loft for our customer in Edenbridge. This boiler comes with 12 years warranty when fitted by us. 3 years boiler service was included as always.